UCPE Pillow Blocks (TAG TILE series) - NTN Corporation

??

CAD-Modellauswahl

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12

		LINA Stückliste	SD Shaft Diameter [mm]	UN Unit Number ⁿ/ₐ	H Dimension [mm]	L Dimension [mm]	J Dimension [mm]	A Dimension [mm]	N Dimension [mm]	N1 Dimension [mm]	H1 Dimension [mm]	H2 Dimension [mm]	L1 Dimension [mm]	B Dimension [mm]	S Dimension [mm]	G Dimension [mm]	SS Set screw ⁿ/ₐ	FB Fixed bolt ⁿ/ₐ	GNP Grease nipple (with grease nipple) ⁿ/ₐ	NNB Nominal number of bearing ⁿ/ₐ	BLR Cr Basic load rating [kN]	BSLR Cor Basic static load rating [kN]	CBLR Cr Basic load rating [kgf]	CBSLR Cor Basic static load rating [kgf]	MASS Mass [kg]

		UCPE201D1	12	UCPE201D1	30.2	120	95	30	12	14	9	61	42	31.0	12.7	4.5	M5x0.8	M10	GA-1/4-28UNF	UC201D1	12.8	6.65	1310	680	0.5
		UCPE202D1	15	UCPE202D1	30.2	120	95	30	12	14	9	61	42	31.0	12.7	4.5	M5x0.8	M10	GA-1/4-28UNF	UC202D1	12.8	6.65	1310	680	0.5
		UCPE203D1	17	UCPE203D1	30.2	120	95	30	12	14	9	61	42	31.0	12.7	4.5	M5x0.8	M10	GA-1/4-28UNF	UC203D1	12.8	6.65	1310	680	0.5
		UCPE204D1	20	UCPE204D1	33.3	120	95	30	12	14	9	64	42	31.0	12.7	4.5	M5x0.8	M10	GA-1/4-28UNF	UC204D1	12.8	6.65	1310	680	0.4
		UCPE205D1	25	UCPE205D1	36.5	130	105	30	12	14	10	70	42	34.1	14.3	5.0	M5x0.8	M10	GA-1/4-28UNF	UC205D1	14.0	7.85	1430	800	0.5
		UCPE206D1	30	UCPE206D1	42.9	155	121	36	17	20	11	82	54	38.1	15.9	5.0	M6x0.75	M14	GA-1/4-28UNF	UC206D1	19.5	11.30	1980	1150	0.8
		UCPE207D1	35	UCPE207D1	47.6	161	127	38	17	20	12	92	54	42.9	17.5	6.0	M6x0.75	M14	GA-1/4-28UNF	UC207D1	25.7	15.30	2620	1560	1.1
		UCPE208D1	40	UCPE208D1	49.2	171	137	40	17	20	12	98	52	49.2	19.0	8.0	M8x1	M14	GA-1/4-28UNF	UC208D1	29.1	17.80	2970	1820	1.3
		UCPE209D1	45	UCPE209D1	54.0	180	146	40	17	20	13	105	60	49.2	19.0	8.0	M8x1	M14	GA-1/4-28UNF	UC209D1	32.5	20.40	3350	2080	1.5
		UCPE210D1	50	UCPE210D1	57.2	195	159	45	19	22	14	114	65	51.6	19.0	9.0	M8x1	M16	GA-PF1/8	UC210D1	35.0	23.20	3600	2370	1.8
		UCPE211D1	55	UCPE211D1	63.5	207	171	45	19	22	15	125	65	55.6	22.2	9.0	M8x1	M16	GA-PF1/8	UC211D1	43.5	29.20	4450	2980	2.4
		UCPE212D1	60	UCPE212D1	69.8	220	184	55	19	22	17	137	70	65.1	25.4	10.0	M10x1.25	M16	GA-PF1/8	UC212D1	52.5	36.00	5350	3700	3.3

Zusätzliche Informationen

Benutzer, die sich dieses Teil angesehen haben, interessierten sich auch für die folgenden Teile

NTN Corporation

StandardNTN Corporation 17.10.2023

NTN Corporation

UCFE Flange Units (Oval) TAG TILE

UCFE Flange Units (Oval) TAG TILENTN Corporation 17.10.2023

UCP - Pillow block - Cast iron - Base with 2 mounting points

UCP - Pillow block - Cast iron - Base with 2 mounting pointsHPC 17.02.2022

with SetscrewFYH INC. 16.11.2022

NTN Corporation

StandardNTN Corporation 17.10.2023

NTN Corporation

Open typeNTN Corporation 17.10.2023

NTN Corporation

Cover with Rubber seal

Cover with Rubber sealNTN Corporation 17.10.2023

Chinese Manufacturers

GB/T7810-1995-ucp - Rolling bearings-Insert bearing units-Boundary dimensions

GB/T7810-1995-ucp - Rolling bearings-Insert bearing units-Boundary dimensio...Chinese Manufacturers 21.05.2014

NTN Corporation

StandardNTN Corporation 03.10.2022

ASK Kugellagerfabrik Artur Seyfert

UCP - UCP 200ASK Kugellagerfabrik Artur Seyfert 21.09.2022

JTEKT Corporation(Koyo)

with SetscrewJTEKT Corporation(Koyo) 16.01.2019

NTN Corporation

ASPB Pillow Blocks

ASPB Pillow BlocksNTN Corporation 17.10.2023

with Setscrew (inch)

with Setscrew (inch)FYH INC. 16.11.2022

NTN Corporation

Type SD30GNTN Corporation 02.11.2023