Open ends - JTEKT Corporation(Koyo)

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Bill of material	ORDER Bearing No. ⁿ/ₐ	FW Inside Diameter [mm]	SD Inside Diameter [mm]	D Outside Diameter [mm]	B Bearing Width [mm]	R Radius [mm]	CR Basic dynamic load rating [kN]	C0 Basic static load rating [kN]	CU Fatigue limit load [kN]	NO Limiting speeds (Oil) [min-1]

		NKJ5/12	NKJ5/12	8	5	15	12	0.3	4.57	4.89	0.74	41000
		NKJ5/16	NKJ5/16	8	5	15	16	0.3	5.22	5.78	0.88	41000
		NKJ6/12	NKJ6/12	9	6	16	12	0.3	4.27	4.60	0.70	40000
		NKJ6/16	NKJ6/16	9	6	16	16	0.3	5.57	6.47	0.98	40000
		NKJ7/12	NKJ7/12	10	7	17	12	0.3	5.40	6.43	0.98	39000
		NKJ7/16TN	NKJ7/16TN	10	7	17	16	0.3	5.30	6.27	0.94	39000
		NKJ9/12A	NKJ9/12A	12	9	19	12	0.3	6.86	7.60	1.15	30000
		NKJ9/16	NKJ9/16	12	9	19	16	0.3	6.78	9.03	1.40	30000
		NA4900	NA4900	14	10	22	13	0.3	9.39	10.30	1.55	24000
		NKJ10/16A	NKJ10/16A	14	10	22	16	0.6	12.40	14.80	2.10	24000
		NKJ10/20A	NKJ10/20A	14	10	22	20	0.3	14.70	18.40	2.75	24000
		NA4901	NA4901	16	12	24	13	0.3	10.50	12.00	1.85	28000
		NKJ12/16A	NKJ12/16A	16	12	24	16	0.3	13.00	16.20	2.50	28000
		NKJ12/20A	NKJ12/20A	16	12	24	20	0.3	15.40	20.20	3.20	28000
		NA6901A	NA6901A	16	12	24	22	0.3	16.10	21.30	3.55	28000
		NKJ15/16A	NKJ15/16A	19	15	27	16	0.3	14.10	19.00	2.90	24000
		NKJ15/20A	NKJ15/20A	19	15	27	20	0.3	16.80	23.60	3.75	24000
		NA4902	NA4902	20	15	28	13	0.3	11.80	15.30	2.35	22000
		NA6902A	NA6902A	20	15	28	23	0.3	18.40	26.90	4.20	22000
		NKJ17/16A	NKJ17/16A	21	17	29	16	0.3	15.30	21.60	3.30	21000
		NKJ17/20A	NKJ17/20A	21	17	29	20	0.3	18.10	23.90	4.25	21000
		NA4903	NA4903	22	17	30	13	0.3	12.20	16.40	2.50	20000
		NA6903A	NA6903A	22	17	30	23	0.6	19.80	30.60	4.75	20000
		NKJS17A	NKJS17A	24	17	37	20	0.6	29.10	32.80	5.30	20000
		NKJ20/16A	NKJ20/16A	24	20	32	16	0.3	16.20	24.30	3.70	18000

Additional Information

Users who viewed this, were also interested in

JTEKT Corporation(Koyo)

K, KZWJTEKT Corporation(Koyo) 22.12.2017

JTEKT Corporation(Koyo)

Seal on one side

Seal on one sideJTEKT Corporation(Koyo) 22.12.2017

JTEKT Corporation(Koyo)

Seal on each side

Seal on each sideJTEKT Corporation(Koyo) 22.12.2017

JTEKT Corporation(Koyo)

Open endsJTEKT Corporation(Koyo) 22.12.2017

NTN Corporation

NA48,NA49,NA59,NA69,NK+IR (With Inner Ring)

NA48,NA49,NA59,NA69,NK+IR (With Inner Ring)NTN Corporation 17.10.2023

IKO (NIPPON THOMPSON CO.,LTD)

With Three-point Contact Ball Bearings (NATB59)

With Three-point Contact Ball Bearings (NATB59)IKO (NIPPON THOMPSON CO.,LTD) 21.06.2020

JTEKT Corporation(Koyo)

Seal on each side

Seal on each sideJTEKT Corporation(Koyo) 22.12.2017

NSK Rolling Bearing

Cylindrical Bore

Cylindrical BoreNSK Rolling Bearing 15.11.2023

JTEKT Corporation(Koyo)

Cylindrical bore

Cylindrical boreJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Open typeJTEKT Corporation(Koyo) 16.01.2019

IKO (NIPPON THOMPSON CO.,LTD)

with Inner Ring-Standard (NA, TAFI, TRI, GTRI)

with Inner Ring-Standard (NA, TAFI, TRI, GTRI)IKO (NIPPON THOMPSON CO.,LTD) 21.06.2020

JTEKT Corporation(Koyo)

Open EndsJTEKT Corporation(Koyo) 22.12.2017

IKO (NIPPON THOMPSON CO.,LTD)

with Inner Ring-Shield type (NAST...ZZ,NAST...ZZR)

with Inner Ring-Shield type (NAST...ZZ,NAST...ZZR)IKO (NIPPON THOMPSON CO.,LTD) 21.06.2020

IKO (NIPPON THOMPSON CO.,LTD)

with Cage-Shield Type (NART...R)

with Cage-Shield Type (NART...R)IKO (NIPPON THOMPSON CO.,LTD) 21.06.2020