KBK/BIK - Safety Coupling with Inner Cone and Collet Clamp - KBK Antriebstechnik

??

CAD模型选择

	1
	2
	3
	4
	5
	6
	7

		LINA 明细表	SIZE Size ⁿ/ₐ	D Outer Diameter [mm]	LD Fitting length of stepped bore [mm]	D3 Hub Diameter [mm]	D4 Hub Diameter [mm]	H Thread Distance [mm]	C Thread Distance front side [mm]	S Disengagement Travel [mm]	F Screw (ISO 4017) ⁿ/ₐ	TA Tightening Torque [mm]	F1 Screw (ISO 4762) ⁿ/ₐ	TA1 Tightening Torque [Nm]	CNSMASSEXACT Mass [kg]	J Moment of Inertia [kg cm²]	CT Torsional Spring Stiffness CT [Nm/rad]	CR Radial Spring Stiffness [N/mm]	CA Axial Spring Stiffness [N/mm]	KR Misalignment radial max. [mm]	KA Misalignment axial max. [mm]	KW Misalignment angular max. [°]	RPM Speed max. [1/min.]

		KBK/BIK-30-79-12-10-5Nm-C...	30	64	-	56	56	20.0	11.1	1.2	M5	6.0	M6	15	0.81	0.26	38000	720	50	0.15	0.6	1.5	9540
		KBK/BIK-60-97-15-12-12Nm-...	60	79	-	66	66	23.0	17.5	1.2	M6	8.5	M8	36	1.48	0.58	75000	1150	90	0.15	0.6	1.5	8180
		KBK/BIK-80-107-20-14-15Nm...	80	94	-	82	82	28.0	10.0	2.0	M6	14.0	M10	72	3.20	0.58	128000	1200	80	0.20	0.5	1.5	6220
		KBK/BIK-150-107-20-14-50N...	150	94	-	82	82	28.0	10.0	2.0	M6	14.0	M10	72	3.20	0.60	155000	2020	145	0.20	0.5	1.5	6220
		KBK/BIK-200-114-20-22-30N...	200	109	-	90	90	31.0	14.0	2.0	M6	14.0	M12	125	3.90	0.60	175000	2500	147	0.20	0.5	1.5	5720
		KBK/BIK-300-133-25-30-60N...	300	119	-	110	110	39.0	13.0	2.0	M8	18.0	M12	125	6.10	3.20	502000	6300	280	0.20	0.5	1.5	5200
		KBK/BIK-500-147-35-35-80N...	500	129	-	122	122	42.0	21.0	2.0	M8	26.0	M12	125	8.40	3.20	690000	7790	100	0.20	0.5	1.5	4470

附加信息

你可能还想看

KBK Antriebstechnik

KBK/BKK - Safety Coupling with 2 Collet Clamps

KBK/BKK - Safety Coupling with 2 Collet ClampsKBK Antriebstechnik 26.11.2019

DryLin® E - Stepper Motors - NEMA11 - Stepper Motors

DryLin® E - Stepper Motors - NEMA11 - Stepper Motorsigus 12.09.2022

N 27 - Low-Profile Linear Guideigus 08.09.2022

J4VEM - Spherical ball, clearance-free

J4VEM - Spherical ball, clearance-freeigus 12.02.2024

AGRM - Axial joint with ball cap and ball stud, right-hand thread

AGRM - Axial joint with ball cap and ball stud, right-hand threadigus 01.02.2024

STZ-Q10-01-XX - Crossbars made of plastic

STZ-Q10-01-XX - Crossbars made of plasticigus 01.05.2020

QJFM - Flange pillow block

QJFM - Flange pillow blockigus 20.07.2021

N 40 - Low-Profile Linear Guideigus 08.09.2022

DryLin® SLWE-BB - With ball bearing lead screw supports

DryLin® SLWE-BB - With ball bearing lead screw supportsigus 12.09.2022

DryLin® SHTP Mini - small and low-cost

DryLin® SHTP Mini - small and low-costigus 12.09.2022

OJUI-03 - Liner Plain Bearing, inch

OJUI-03 - Liner Plain Bearing, inchigus 19.01.2021

KSTM - Pillow block bearings

KSTM - Pillow block bearingsigus 12.02.2024

WEI - Inch sizes, Standard – iglidur® W300; extreme wear resistance

WEI - Inch sizes, Standard – iglidur® W300; extreme wear resistanceigus 19.01.2021

RKM - Low Cost – iglidur® R; low friction values

RKM - Low Cost – iglidur® R; low friction valuesigus 12.02.2024