F14 YC (150/560)

čeština	dansk
Deutsch	English
español	suomi
français	italiano
Nederlands	polski
português	русский
slovenščina	svenska

CADモデル選択

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24

		LINA 部品表	ARTICLE_ID Article number ⁿ/ₐ	ARTICLE_NAME Type code ⁿ/ₐ	MANUFACTURER_NAME Manufacturer ⁿ/ₐ	DESCRIPTION_SHORT Short text ⁿ/ₐ	DESCRIPTION_LONG Tender text ⁿ/ₐ	PRODUCT_DESCRIPTION Product description ⁿ/ₐ	ETIM_CLASS__EC_ ETIM Class (EC) ⁿ/ₐ	EF023038 Pump casing material ⁿ/ₐ	EF023143 Quality class of pump casing ⁿ/ₐ	EF011652 Material pump wheel ⁿ/ₐ	EF024149 Material pump wheel ⁿ/ₐ	EF014904 Volume flow rate (BEP) [m³/h]	EF014905 Head at flow rate (BEP) [kPa]	EF000991 Max. discharge flow [m³/h]	EF000992 Max. static height [m]	EF020449 Max. operating pressure [bar]	EF003701 Electrical connection ⁿ/ₐ	EF000536 Cable length [mm]	EF003977 Rated voltage [V]	EF000351 Number of phases ⁿ/ₐ	EF005455 Frequency [Hz]	EF000001 Nominal current [A]	EF012424 Motor power input (P1) per motor [kW]	EF012425 Motor power output (P2) per motor [kW]	EF013710 Minimum Efficiency Index (MEI) ⁿ/ₐ	EF023092 Insulation class acc. to IEC ⁿ/ₐ	EF001642 Rotational speed [1/min]	EF020121 Motor speed control ⁿ/ₐ	EF020120 Type of speed control ⁿ/ₐ	EF015266 Communication ⁿ/ₐ	EF007178 Radio standard Bluetooth ⁿ/ₐ	EF007179 Radio standard 2G / 3G / 4G ⁿ/ₐ	EF016383 Radio standard 2G / 3G / 4G ⁿ/ₐ	EF016385 Radio standard 5G ⁿ/ₐ	EF016386 Interface signal 0-10 V / 2-10 V ⁿ/ₐ	EF016387 Interface signal 0-20 mA / 4-20 mA ⁿ/ₐ	EF016388 Interface PT100 / PT1000 / PTC ⁿ/ₐ	EF016389 Interface Pulse Width Modulation (PWM) ⁿ/ₐ	EF016390 Interface pulse counter ⁿ/ₐ	EF003626 Potential free switch contact ⁿ/ₐ	EF007314 With communication interface RS-485 ⁿ/ₐ	EF007312 With communication interface RS-232 ⁿ/ₐ	EF007521 Supporting protocol for EtherNet/IP ⁿ/ₐ	EF003055 Supporting protocol for KNX ⁿ/ₐ	EF003052 Supporting protocol for PROFIBUS ⁿ/ₐ	EF007525 Supporting protocol for PROFINET IO ⁿ/ₐ	EF016391 Supporting protocol for CAN/CANOpen ⁿ/ₐ	EF016392 Supporting protocol for Modbus TCP ⁿ/ₐ	EF016393 Supporting protocol for Modbus RTU ⁿ/ₐ	EF016394 Supporting protocol for BACnet MS/TP ⁿ/ₐ	EF016395 Supporting protocol for BACnet IP ⁿ/ₐ	EF016396 Supporting protocol for LON/LONWorks ⁿ/ₐ	EF016397 Supporting protocol for LIN Bus ⁿ/ₐ	EF023182 Medium temperature (continuous) [°C]	EF002386 Ambient temperature [°C]	EF025116 Connection on supply side ⁿ/ₐ	EF025117 Diameter of connection on supply side ⁿ/ₐ	EF025503 Outer pipe diameter connection inlet side [mm]	EF026143 Flange compression stage connection inlet [bar]	EF014906 Connection standard inlet side ⁿ/ₐ	EF025977 Connection outlet side ⁿ/ₐ	EF025118 Diameter of connection on delivery side ⁿ/ₐ	EF025504 Outer pipe diameter connection outlet side [mm]	EF026233 Flange compression stage connection outlet [bar]	EF014907 Connection standard outlet side ⁿ/ₐ	EF001339 Flange shape ⁿ/ₐ	EF005474 Degree of protection (IP rating) ⁿ/ₐ	EF020246 Forced motor cooling ⁿ/ₐ	EF023094 Height of suction end [mm]	EF023095 Height of pressure end [mm]	EF023099 Length of centre pressure/suction [mm]	EF023096 Pump length [mm]	EF023097 Length of foundation plate [mm]	EF023098 Foundation plate width [mm]	EF004663 Explosion-proof ⁿ/ₐ	EF014908 Standard motor ⁿ/ₐ	EF014979 Motor efficiency class ⁿ/ₐ	EF025859 Direction of rotation ⁿ/ₐ	EF009598 Kind of motor starter ⁿ/ₐ	EF008234 Type of motor protection ⁿ/ₐ	EF013402 Height of flap [mm]	EF000167 Weight [kg]	MECHANICAL_SEAL Mechanical seal ⁿ/ₐ	SPACER_COUPLING Spacer coupling ⁿ/ₐ	A1 Angle to first bolt hole [°]	A2 Angle to first bolt hole [°]	B1 Thickness flange (incl. sealing edge) [mm]	B2 Thickness flange (incl. sealing edge) [mm]	D21 Diameter bolt hole [mm]	D22 Diameter bolt hole [mm]	D1 Outer diameter of flange [mm]	D2 Outer diameter of flange [mm]	DN1 Dimensions ⁿ/ₐ	DN2 Dimensions ⁿ/ₐ	DO1 Outer pipe diameter connection [mm]	DO2 Outer pipe diameter connection [mm]	F1 Thickness sealing edge [mm]	F2 Thickness sealing edge [mm]	K1 Pitch circle [mm]	K2 Pitch circle [mm]	N1 Number of bolt holes [mm]	N2 Number of bolt holes ⁿ/ₐ	D41 Diameter sealing edge [mm]	D42 Diameter sealing edge [mm]	DIMA1 Dimensions [mm]	DIMA2 Dimensions [mm]	DIMB1 Dimensions [mm]	DIMB2 Dimensions [mm]	B3 Dimensions [mm]	B4 Dimensions [mm]	B5 Dimensions [mm]	B6 Dimensions [mm]	B7 Dimensions [mm]	B8 Dimensions [mm]	B9 Dimensions [mm]	CDD Dimensions ⁿ/ₐ	CDS Dimensions ⁿ/ₐ	DIAMD Dimensions [mm]	DIAMD2 Dimensions [mm]	DIAMD5 Dimensions [mm]	DIAME Dimensions [mm]	DIAMF Dimensions [mm]	H1 Dimensions [mm]	H2 Dimensions [mm]	H3 Dimensions [mm]	H4 Dimensions [mm]	H5 Dimensions [mm]	H6 Dimensions [mm]	H7 Dimensions [mm]	H8 Dimensions [mm]	H9 Dimensions [mm]	H10 Dimensions [mm]	H11 Dimensions [mm]	H12 Dimensions [mm]	H13 Dimensions [mm]	H14 Dimensions [mm]	H15 Dimensions [mm]	H16 Dimensions [mm]	H17 Dimensions [mm]	H18 Dimensions [mm]	H19 Dimensions [mm]	HC Dimensions [mm]	L Dimensions [mm]	L0 Port-to-port length [mm]	L1 Dimensions [mm]	L2 Dimensions [mm]	L3 Dimensions [mm]	L4 Dimensions [mm]	L5 Dimensions [mm]	L6 Dimensions [mm]	L7 Dimensions [mm]	L8 Dimensions [mm]	L9 Dimensions [mm]	L10 Dimensions [mm]	L11 Dimensions [mm]	L12 Dimensions [mm]	L13 Dimensions [mm]	L14 Dimensions ⁿ/ₐ	LL Dimensions [mm]	LM Dimensions [mm]	N3 Number of drilled holes ⁿ/ₐ	N4 Number of drilled holes ⁿ/ₐ	PM Dimensions ⁿ/ₐ	TG Dimensions ⁿ/ₐ	VG Dimensions ⁿ/ₐ	X Dimensions [mm]

Atmos TERA-SCH150/560-160...	Atmos TERA-SCH150/560-160...	Atmos TERA-SCH150/560-160...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-160...	EC004577	Grey cast iron	EN-GJL-250	Bronze	G-CuAl10Ni	10.0	2 x M63x1.5	400.000	3.000	50	280.0	160.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	380.0	380.0	327.5	2830.0	976.0	Standard motor	IE3	In anticlockwise rotation	Direct On Line (DOL)	integrated	715.0	AQ1EGG	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	928.500	976.000	225.000	235.000	155	120	1040.000	160.000	280	1"	1"	24.000	63.000	318.000	26.000	59	1445.000	1120	715.000	1141.000	380	380	120.000	570.000	235.000	235.000	975	267	320	122	175	400.000	25.000	25.000	339	644.000	2830.000	327.500	551.500	668.500	1470.000	2260.000	300.000	830.000	830.000	210.000	210.000	160.000	160.000	720.000	500.000	379.000	382.000	6	4	1"	M8	M8	140.000
Atmos TERA-SCH150/560-160...	Atmos TERA-SCH150/560-160...	Atmos TERA-SCH150/560-160...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-160...	EC004577	Grey cast iron	EN-GJL-250	Grey cast iron	EN-GJL-250	10.0	2 x M63x1.5	400.000	3.000	50	280.0	160.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	380.0	380.0	327.5	2830.0	976.0	Standard motor	IE3	In anticlockwise rotation	Direct On Line (DOL)	integrated	715.0	AQ1EGG	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	928.500	976.000	225.000	235.000	155	120	1040.000	160.000	280	1"	1"	24.000	63.000	318.000	26.000	59	1445.000	1120	715.000	1141.000	380	380	120.000	570.000	235.000	235.000	975	267	320	122	175	400.000	25.000	25.000	339	644.000	2830.000	327.500	551.500	668.500	1470.000	2260.000	300.000	830.000	830.000	210.000	210.000	160.000	160.000	720.000	500.000	379.000	382.000	6	4	1"	M8	M8	140.000
Atmos TERA-SCH150/560-160...	Atmos TERA-SCH150/560-160...	Atmos TERA-SCH150/560-160...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-160...	EC004577	Grey cast iron	EN-GJL-250	Stainless steel	GX5CrNiMo19-11-2	10.0	2 x M63x1.5	400.000	3.000	50	280.0	160.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	380.0	380.0	327.5	2830.0	976.0	Standard motor	IE3	In anticlockwise rotation	Direct On Line (DOL)	integrated	715.0	AQ1EGG	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	928.500	976.000	225.000	235.000	155	120	1040.000	160.000	280	1"	1"	24.000	63.000	318.000	26.000	59	1445.000	1120	715.000	1141.000	380	380	120.000	570.000	235.000	235.000	975	267	320	122	175	400.000	25.000	25.000	339	644.000	2830.000	327.500	551.500	668.500	1470.000	2260.000	300.000	830.000	830.000	210.000	210.000	160.000	160.000	720.000	500.000	379.000	382.000	6	4	1"	M8	M8	140.000
Atmos TERA-SCH150/560-160...	Atmos TERA-SCH150/560-160...	Atmos TERA-SCH150/560-160...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-160...	EC004577	Grey cast iron	EN-GJL-250	Bronze	G-CuAl10Ni	10.0	2 x M63x1.5	400.000	3.000	50	280.0	160.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	380.0	380.0	327.5	2830.0	976.0	Standard motor	IE3	In anticlockwise rotation	Direct On Line (DOL)	integrated	715.0	on request	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	928.500	976.000	225.000	235.000	155	120	1040.000	160.000	280	1"	1"	24.000	63.000	318.000	26.000	59	1445.000	1120	715.000	1141.000	380	380	120.000	570.000	235.000	235.000	975	267	320	122	175	400.000	25.000	25.000	339	644.000	2830.000	327.500	551.500	668.500	1470.000	2260.000	300.000	830.000	830.000	210.000	210.000	160.000	160.000	720.000	500.000	379.000	382.000	6	4	1"	M8	M8	140.000
Atmos TERA-SCH150/560-160...	Atmos TERA-SCH150/560-160...	Atmos TERA-SCH150/560-160...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-160...	EC004577	Grey cast iron	EN-GJL-250	Grey cast iron	EN-GJL-250	10.0	2 x M63x1.5	400.000	3.000	50	280.0	160.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	380.0	380.0	327.5	2830.0	976.0	Standard motor	IE3	In anticlockwise rotation	Direct On Line (DOL)	integrated	715.0	on request	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	928.500	976.000	225.000	235.000	155	120	1040.000	160.000	280	1"	1"	24.000	63.000	318.000	26.000	59	1445.000	1120	715.000	1141.000	380	380	120.000	570.000	235.000	235.000	975	267	320	122	175	400.000	25.000	25.000	339	644.000	2830.000	327.500	551.500	668.500	1470.000	2260.000	300.000	830.000	830.000	210.000	210.000	160.000	160.000	720.000	500.000	379.000	382.000	6	4	1"	M8	M8	140.000
Atmos TERA-SCH150/560-160...	Atmos TERA-SCH150/560-160...	Atmos TERA-SCH150/560-160...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-160...	EC004577	Grey cast iron	EN-GJL-250	Stainless steel	GX5CrNiMo19-11-2	10.0	2 x M63x1.5	400.000	3.000	50	280.0	160.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	380.0	380.0	327.5	2830.0	976.0	Standard motor	IE3	In anticlockwise rotation	Direct On Line (DOL)	integrated	715.0	on request	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	928.500	976.000	225.000	235.000	155	120	1040.000	160.000	280	1"	1"	24.000	63.000	318.000	26.000	59	1445.000	1120	715.000	1141.000	380	380	120.000	570.000	235.000	235.000	975	267	320	122	175	400.000	25.000	25.000	339	644.000	2830.000	327.500	551.500	668.500	1470.000	2260.000	300.000	830.000	830.000	210.000	210.000	160.000	160.000	720.000	500.000	379.000	382.000	6	4	1"	M8	M8	140.000
Atmos TERA-SCH150/560-200...	Atmos TERA-SCH150/560-200...	Atmos TERA-SCH150/560-200...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-200...	EC004577	Grey cast iron	EN-GJL-250	Bronze	G-CuAl10Ni	10.0	2 x M63x1.5	400.000	3.000	50	346.0	200.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	380.0	380.0	327.5	2730.0	976.0	Standard motor	IE3	In anticlockwise rotation	Direct On Line (DOL)	integrated	715.0	AQ1EGG	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	928.500	976.000	225.000	235.000	155	120	1040.000	160.000	280	1"	1"	24.000	63.000	318.000	26.000	59	1245.000	1120	715.000	1141.000	380	380	120.000	570.000	235.000	235.000	975	267	320	122	175	400.000	25.000	25.000	339	644.000	2730.000	327.500	551.500	668.500	1370.000	2260.000	300.000	830.000	830.000	210.000	210.000	160.000	160.000	720.000	500.000	379.000	382.000	6	4	1"	M8	M8	140.000
Atmos TERA-SCH150/560-200...	Atmos TERA-SCH150/560-200...	Atmos TERA-SCH150/560-200...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-200...	EC004577	Grey cast iron	EN-GJL-250	Grey cast iron	EN-GJL-250	10.0	2 x M63x1.5	400.000	3.000	50	346.0	200.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	380.0	380.0	327.5	2730.0	976.0	Standard motor	IE3	In anticlockwise rotation	Direct On Line (DOL)	integrated	715.0	AQ1EGG	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	928.500	976.000	225.000	235.000	155	120	1040.000	160.000	280	1"	1"	24.000	63.000	318.000	26.000	59	1245.000	1120	715.000	1141.000	380	380	120.000	570.000	235.000	235.000	975	267	320	122	175	400.000	25.000	25.000	339	644.000	2730.000	327.500	551.500	668.500	1370.000	2260.000	300.000	830.000	830.000	210.000	210.000	160.000	160.000	720.000	500.000	379.000	382.000	6	4	1"	M8	M8	140.000
Atmos TERA-SCH150/560-200...	Atmos TERA-SCH150/560-200...	Atmos TERA-SCH150/560-200...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-200...	EC004577	Grey cast iron	EN-GJL-250	Stainless steel	GX5CrNiMo19-11-2	10.0	2 x M63x1.5	400.000	3.000	50	346.0	200.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	380.0	380.0	327.5	2730.0	976.0	Standard motor	IE3	In anticlockwise rotation	Direct On Line (DOL)	integrated	715.0	AQ1EGG	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	928.500	976.000	225.000	235.000	155	120	1040.000	160.000	280	1"	1"	24.000	63.000	318.000	26.000	59	1245.000	1120	715.000	1141.000	380	380	120.000	570.000	235.000	235.000	975	267	320	122	175	400.000	25.000	25.000	339	644.000	2730.000	327.500	551.500	668.500	1370.000	2260.000	300.000	830.000	830.000	210.000	210.000	160.000	160.000	720.000	500.000	379.000	382.000	6	4	1"	M8	M8	140.000
Atmos TERA-SCH150/560-200...	Atmos TERA-SCH150/560-200...	Atmos TERA-SCH150/560-200...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-200...	EC004577	Grey cast iron	EN-GJL-250	Bronze	G-CuAl10Ni	10.0	2 x M63x1.5	400.000	3.000	50	346.0	200.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	380.0	380.0	327.5	2730.0	976.0	Standard motor	IE3	In anticlockwise rotation	Direct On Line (DOL)	integrated	715.0	on request	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	928.500	976.000	225.000	235.000	155	120	1040.000	160.000	280	1"	1"	24.000	63.000	318.000	26.000	59	1245.000	1120	715.000	1141.000	380	380	120.000	570.000	235.000	235.000	975	267	320	122	175	400.000	25.000	25.000	339	644.000	2730.000	327.500	551.500	668.500	1370.000	2260.000	300.000	830.000	830.000	210.000	210.000	160.000	160.000	720.000	500.000	379.000	382.000	6	4	1"	M8	M8	140.000
Atmos TERA-SCH150/560-200...	Atmos TERA-SCH150/560-200...	Atmos TERA-SCH150/560-200...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-200...	EC004577	Grey cast iron	EN-GJL-250	Grey cast iron	EN-GJL-250	10.0	2 x M63x1.5	400.000	3.000	50	346.0	200.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	380.0	380.0	327.5	2730.0	976.0	Standard motor	IE3	In anticlockwise rotation	Direct On Line (DOL)	integrated	715.0	on request	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	928.500	976.000	225.000	235.000	155	120	1040.000	160.000	280	1"	1"	24.000	63.000	318.000	26.000	59	1245.000	1120	715.000	1141.000	380	380	120.000	570.000	235.000	235.000	975	267	320	122	175	400.000	25.000	25.000	339	644.000	2730.000	327.500	551.500	668.500	1370.000	2260.000	300.000	830.000	830.000	210.000	210.000	160.000	160.000	720.000	500.000	379.000	382.000	6	4	1"	M8	M8	140.000
Atmos TERA-SCH150/560-200...	Atmos TERA-SCH150/560-200...	Atmos TERA-SCH150/560-200...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-200...	EC004577	Grey cast iron	EN-GJL-250	Stainless steel	GX5CrNiMo19-11-2	10.0	2 x M63x1.5	400.000	3.000	50	346.0	200.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	380.0	380.0	327.5	2730.0	976.0	Standard motor	IE3	In anticlockwise rotation	Direct On Line (DOL)	integrated	715.0	on request	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	928.500	976.000	225.000	235.000	155	120	1040.000	160.000	280	1"	1"	24.000	63.000	318.000	26.000	59	1245.000	1120	715.000	1141.000	380	380	120.000	570.000	235.000	235.000	975	267	320	122	175	400.000	25.000	25.000	339	644.000	2730.000	327.500	551.500	668.500	1370.000	2260.000	300.000	830.000	830.000	210.000	210.000	160.000	160.000	720.000	500.000	379.000	382.000	6	4	1"	M8	M8	140.000
Atmos TERA-SCH150/560-250...	Atmos TERA-SCH150/560-250...	Atmos TERA-SCH150/560-250...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-250...	EC004577	Grey cast iron	EN-GJL-250	Bronze	G-CuAl10Ni	10.0	2 x M63x1.5	400.000	3.000	50	436.0	250.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	400.0	400.0	327.5	2930.0	1016.0	Standard motor	IE3	In clockwise rotation	Direct On Line (DOL)	integrated	735.0	AQ1EGG	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	964.000	1016.000	225.000	235.000	155	120	1080.000	156.000	280	1"	1"	28.000	80.000	303.000	26.000	59	1390.000	1140	735.000	1200.000	400	400	140.000	570.000	235.000	235.000	975	287	340	122	175	380.000	25.000	25.000	339	644.000	2930.000	327.500	551.500	668.500	1530.000	2500.000	300.000	633.300	833.000	210.000	210.000	160.000	160.000	790.000	580.000	404.000	436.000	8	4	1"	M8	M8	180.000
Atmos TERA-SCH150/560-250...	Atmos TERA-SCH150/560-250...	Atmos TERA-SCH150/560-250...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-250...	EC004577	Grey cast iron	EN-GJL-250	Grey cast iron	EN-GJL-250	10.0	2 x M63x1.5	400.000	3.000	50	436.0	250.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	400.0	400.0	327.5	2930.0	1016.0	Standard motor	IE3	In clockwise rotation	Direct On Line (DOL)	integrated	735.0	AQ1EGG	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	964.000	1016.000	225.000	235.000	155	120	1080.000	156.000	280	1"	1"	28.000	80.000	303.000	26.000	59	1390.000	1140	735.000	1200.000	400	400	140.000	570.000	235.000	235.000	975	287	340	122	175	380.000	25.000	25.000	339	644.000	2930.000	327.500	551.500	668.500	1530.000	2500.000	300.000	633.300	833.000	210.000	210.000	160.000	160.000	790.000	580.000	404.000	436.000	8	4	1"	M8	M8	180.000
Atmos TERA-SCH150/560-250...	Atmos TERA-SCH150/560-250...	Atmos TERA-SCH150/560-250...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-250...	EC004577	Grey cast iron	EN-GJL-250	Stainless steel	GX5CrNiMo19-11-2	10.0	2 x M63x1.5	400.000	3.000	50	436.0	250.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	400.0	400.0	327.5	2930.0	1016.0	Standard motor	IE3	In clockwise rotation	Direct On Line (DOL)	integrated	735.0	AQ1EGG	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	964.000	1016.000	225.000	235.000	155	120	1080.000	156.000	280	1"	1"	28.000	80.000	303.000	26.000	59	1390.000	1140	735.000	1200.000	400	400	140.000	570.000	235.000	235.000	975	287	340	122	175	380.000	25.000	25.000	339	644.000	2930.000	327.500	551.500	668.500	1530.000	2500.000	300.000	633.300	833.000	210.000	210.000	160.000	160.000	790.000	580.000	404.000	436.000	8	4	1"	M8	M8	180.000
Atmos TERA-SCH150/560-250...	Atmos TERA-SCH150/560-250...	Atmos TERA-SCH150/560-250...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-250...	EC004577	Grey cast iron	EN-GJL-250	Bronze	G-CuAl10Ni	10.0	2 x M63x1.5	400.000	3.000	50	436.0	250.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	400.0	400.0	327.5	2930.0	1016.0	Standard motor	IE3	In clockwise rotation	Direct On Line (DOL)	integrated	735.0	on request	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	964.000	1016.000	225.000	235.000	155	120	1080.000	156.000	280	1"	1"	28.000	80.000	303.000	26.000	59	1390.000	1140	735.000	1200.000	400	400	140.000	570.000	235.000	235.000	975	287	340	122	175	380.000	25.000	25.000	339	644.000	2930.000	327.500	551.500	668.500	1530.000	2500.000	300.000	633.300	833.000	210.000	210.000	160.000	160.000	790.000	580.000	404.000	436.000	8	4	1"	M8	M8	180.000
Atmos TERA-SCH150/560-250...	Atmos TERA-SCH150/560-250...	Atmos TERA-SCH150/560-250...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-250...	EC004577	Grey cast iron	EN-GJL-250	Grey cast iron	EN-GJL-250	10.0	2 x M63x1.5	400.000	3.000	50	436.0	250.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	400.0	400.0	327.5	2930.0	1016.0	Standard motor	IE3	In clockwise rotation	Direct On Line (DOL)	integrated	735.0	on request	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	964.000	1016.000	225.000	235.000	155	120	1080.000	156.000	280	1"	1"	28.000	80.000	303.000	26.000	59	1390.000	1140	735.000	1200.000	400	400	140.000	570.000	235.000	235.000	975	287	340	122	175	380.000	25.000	25.000	339	644.000	2930.000	327.500	551.500	668.500	1530.000	2500.000	300.000	633.300	833.000	210.000	210.000	160.000	160.000	790.000	580.000	404.000	436.000	8	4	1"	M8	M8	180.000
Atmos TERA-SCH150/560-250...	Atmos TERA-SCH150/560-250...	Atmos TERA-SCH150/560-250...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-250...	EC004577	Grey cast iron	EN-GJL-250	Stainless steel	GX5CrNiMo19-11-2	10.0	2 x M63x1.5	400.000	3.000	50	436.0	250.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	400.0	400.0	327.5	2930.0	1016.0	Standard motor	IE3	In clockwise rotation	Direct On Line (DOL)	integrated	735.0	on request	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	964.000	1016.000	225.000	235.000	155	120	1080.000	156.000	280	1"	1"	28.000	80.000	303.000	26.000	59	1390.000	1140	735.000	1200.000	400	400	140.000	570.000	235.000	235.000	975	287	340	122	175	380.000	25.000	25.000	339	644.000	2930.000	327.500	551.500	668.500	1530.000	2500.000	300.000	633.300	833.000	210.000	210.000	160.000	160.000	790.000	580.000	404.000	436.000	8	4	1"	M8	M8	180.000
Atmos TERA-SCH150/560-315...	Atmos TERA-SCH150/560-315...	Atmos TERA-SCH150/560-315...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-315...	EC004577	Grey cast iron	EN-GJL-250	Bronze	G-CuAl10Ni	10.0	2 x M80x2	400.000	3.000	50	562.0	315.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	400.0	400.0	327.5	2930.0	1016.0	Standard motor	IE3	In clockwise rotation	Direct On Line (DOL)	integrated	735.0	AQ1EGG	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	964.000	1016.000	225.000	235.000	155	120	1080.000	156.000	280	1"	1"	28.000	80.000	303.000	26.000	59	1390.000	1140	735.000	1200.000	400	400	140.000	570.000	235.000	235.000	975	287	340	122	175	380.000	25.000	25.000	339	723.000	2930.000	327.500	551.500	668.500	1530.000	2500.000	300.000	633.300	833.000	210.000	210.000	160.000	160.000	790.000	580.000	404.000	436.000	8	4	1"	M8	M8	180.000
Atmos TERA-SCH150/560-315...	Atmos TERA-SCH150/560-315...	Atmos TERA-SCH150/560-315...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-315...	EC004577	Grey cast iron	EN-GJL-250	Grey cast iron	EN-GJL-250	10.0	2 x M80x2	400.000	3.000	50	562.0	315.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	400.0	400.0	327.5	2930.0	1016.0	Standard motor	IE3	In clockwise rotation	Direct On Line (DOL)	integrated	735.0	AQ1EGG	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	964.000	1016.000	225.000	235.000	155	120	1080.000	156.000	280	1"	1"	28.000	80.000	303.000	26.000	59	1390.000	1140	735.000	1200.000	400	400	140.000	570.000	235.000	235.000	975	287	340	122	175	380.000	25.000	25.000	339	723.000	2930.000	327.500	551.500	668.500	1530.000	2500.000	300.000	633.300	833.000	210.000	210.000	160.000	160.000	790.000	580.000	404.000	436.000	8	4	1"	M8	M8	180.000
Atmos TERA-SCH150/560-315...	Atmos TERA-SCH150/560-315...	Atmos TERA-SCH150/560-315...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-315...	EC004577	Grey cast iron	EN-GJL-250	Stainless steel	GX5CrNiMo19-11-2	10.0	2 x M80x2	400.000	3.000	50	562.0	315.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	400.0	400.0	327.5	2930.0	1016.0	Standard motor	IE3	In clockwise rotation	Direct On Line (DOL)	integrated	735.0	AQ1EGG	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	964.000	1016.000	225.000	235.000	155	120	1080.000	156.000	280	1"	1"	28.000	80.000	303.000	26.000	59	1390.000	1140	735.000	1200.000	400	400	140.000	570.000	235.000	235.000	975	287	340	122	175	380.000	25.000	25.000	339	723.000	2930.000	327.500	551.500	668.500	1530.000	2500.000	300.000	633.300	833.000	210.000	210.000	160.000	160.000	790.000	580.000	404.000	436.000	8	4	1"	M8	M8	180.000
Atmos TERA-SCH150/560-315...	Atmos TERA-SCH150/560-315...	Atmos TERA-SCH150/560-315...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-315...	EC004577	Grey cast iron	EN-GJL-250	Bronze	G-CuAl10Ni	10.0	2 x M80x2	400.000	3.000	50	562.0	315.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	400.0	400.0	327.5	2930.0	1016.0	Standard motor	IE3	In clockwise rotation	Direct On Line (DOL)	integrated	735.0	on request	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	964.000	1016.000	225.000	235.000	155	120	1080.000	156.000	280	1"	1"	28.000	80.000	303.000	26.000	59	1390.000	1140	735.000	1200.000	400	400	140.000	570.000	235.000	235.000	975	287	340	122	175	380.000	25.000	25.000	339	723.000	2930.000	327.500	551.500	668.500	1530.000	2500.000	300.000	633.300	833.000	210.000	210.000	160.000	160.000	790.000	580.000	404.000	436.000	8	4	1"	M8	M8	180.000
Atmos TERA-SCH150/560-315...	Atmos TERA-SCH150/560-315...	Atmos TERA-SCH150/560-315...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-315...	EC004577	Grey cast iron	EN-GJL-250	Grey cast iron	EN-GJL-250	10.0	2 x M80x2	400.000	3.000	50	562.0	315.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	400.0	400.0	327.5	2930.0	1016.0	Standard motor	IE3	In clockwise rotation	Direct On Line (DOL)	integrated	735.0	on request	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	964.000	1016.000	225.000	235.000	155	120	1080.000	156.000	280	1"	1"	28.000	80.000	303.000	26.000	59	1390.000	1140	735.000	1200.000	400	400	140.000	570.000	235.000	235.000	975	287	340	122	175	380.000	25.000	25.000	339	723.000	2930.000	327.500	551.500	668.500	1530.000	2500.000	300.000	633.300	833.000	210.000	210.000	160.000	160.000	790.000	580.000	404.000	436.000	8	4	1"	M8	M8	180.000
Atmos TERA-SCH150/560-315...	Atmos TERA-SCH150/560-315...	Atmos TERA-SCH150/560-315...	WILO SE	Axially spilt case pump m...	Non-self-priming, single-...	Atmos TERA-SCH150/560-315...	EC004577	Grey cast iron	EN-GJL-250	Stainless steel	GX5CrNiMo19-11-2	10.0	2 x M80x2	400.000	3.000	50	562.0	315.0	F	1450.0	Regulated in fixed steps	None	no	no	no	No	No	No	No	No	no	No	No	No	No	No	No	No	No	No	no	no	no	No	-10.0	Flange	DN 250	250	PN 10	EN 1092-2	Flange;DN150-PN10-EN1092-...	DN 150	150	PN 10	EN 1092-2	Flange	IP55	400.0	400.0	327.5	2930.0	1016.0	Standard motor	IE3	In clockwise rotation	Direct On Line (DOL)	integrated	735.0	on request	With spacer	15.000	22.500	28.000	26.000	23.000	23.000	395.000	285.000	DN 250	DN 150	258	158	3	3	350.000	240.000	12.000	8.000	319	211	505	480	964.000	1016.000	225.000	235.000	155	120	1080.000	156.000	280	1"	1"	28.000	80.000	303.000	26.000	59	1390.000	1140	735.000	1200.000	400	400	140.000	570.000	235.000	235.000	975	287	340	122	175	380.000	25.000	25.000	339	723.000	2930.000	327.500	551.500	668.500	1530.000	2500.000	300.000	633.300	833.000	210.000	210.000	160.000	160.000	790.000	580.000	404.000	436.000	8	4	1"	M8	M8	180.000

追加の情報

このページを訪れたユーザーが閲覧したその他のデータ

サードパーティの Cookie はサポートされていません

F14 YC (150/560)