2m³/h (nominal flow), PN25 - Wilo

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19

		LINA Bill of material	ARTICLE_ID Article number ⁿ/ₐ	ARTICLE_NAME Type code ⁿ/ₐ	MANUFACTURER_NAME Manufacturer ⁿ/ₐ	DESCRIPTION_SHORT Short text ⁿ/ₐ	DESCRIPTION_LONG Tender text ⁿ/ₐ	PRODUCT_DESCRIPTION Product description ⁿ/ₐ	ETIM_CLASS__EC_ ETIM Class (EC) ⁿ/ₐ	EF000010 Model ⁿ/ₐ	EF023038 Pump casing material ⁿ/ₐ	EF023143 Quality class of pump casing ⁿ/ₐ	EF011652 Material pump wheel ⁿ/ₐ	EF024149 Material pump wheel ⁿ/ₐ	EF004250 Material of connection ⁿ/ₐ	EF025877 Material quality connection ⁿ/ₐ	EF014904 Volume flow rate (BEP) [m³/h]	EF014905 Head at flow rate (BEP) [kPa]	EF000991 Max. discharge flow [m³/h]	EF000992 Max. static height [m]	EF020449 Max. operating pressure [bar]	EF003701 Electrical connection ⁿ/ₐ	EF000536 Cable length [mm]	EF003977 Rated voltage [V]	EF000351 Number of phases ⁿ/ₐ	EF005455 Frequency [Hz]	EF000001 Nominal current [A]	EF012425 Motor power output (P2) per motor [kW]	EF013710 Minimum Efficiency Index (MEI) ⁿ/ₐ	EF023092 Insulation class acc. to IEC ⁿ/ₐ	EF001642 Rotational speed [1/min]	EF020121 Motor speed control ⁿ/ₐ	EF020120 Type of speed control ⁿ/ₐ	EF023093 Motor with extended shaft ⁿ/ₐ	EF015266 Communication ⁿ/ₐ	EF007178 Radio standard Bluetooth ⁿ/ₐ	EF007179 Radio standard 2G / 3G / 4G ⁿ/ₐ	EF016383 Radio standard 2G / 3G / 4G ⁿ/ₐ	EF016385 Radio standard 5G ⁿ/ₐ	EF016386 Interface signal 0-10 V / 2-10 V ⁿ/ₐ	EF016387 Interface signal 0-20 mA / 4-20 mA ⁿ/ₐ	EF016388 Interface PT100 / PT1000 / PTC ⁿ/ₐ	EF016389 Interface Pulse Width Modulation (PWM) ⁿ/ₐ	EF016390 Interface pulse counter ⁿ/ₐ	EF003626 Potential free switch contact ⁿ/ₐ	EF007314 With communication interface RS-485 ⁿ/ₐ	EF007312 With communication interface RS-232 ⁿ/ₐ	EF007521 Supporting protocol for EtherNet/IP ⁿ/ₐ	EF003055 Supporting protocol for KNX ⁿ/ₐ	EF003052 Supporting protocol for PROFIBUS ⁿ/ₐ	EF007525 Supporting protocol for PROFINET IO ⁿ/ₐ	EF016391 Supporting protocol for CAN/CANOpen ⁿ/ₐ	EF016392 Supporting protocol for Modbus TCP ⁿ/ₐ	EF016393 Supporting protocol for Modbus RTU ⁿ/ₐ	EF016394 Supporting protocol for BACnet MS/TP ⁿ/ₐ	EF016395 Supporting protocol for BACnet IP ⁿ/ₐ	EF016396 Supporting protocol for LON/LONWorks ⁿ/ₐ	EF016397 Supporting protocol for LIN Bus ⁿ/ₐ	EF023182 Medium temperature (continuous) [°C]	EF002386 Ambient temperature [°C]	EF025116 Connection on supply side ⁿ/ₐ	EF025117 Diameter of connection on supply side ⁿ/ₐ	EF025503 Outer pipe diameter connection inlet side [mm]	EF026143 Flange compression stage connection inlet [bar]	EF014906 Connection standard inlet side ⁿ/ₐ	EF025977 Connection outlet side ⁿ/ₐ	EF025118 Diameter of connection on delivery side ⁿ/ₐ	EF025504 Outer pipe diameter connection outlet side [mm]	EF026233 Flange compression stage connection outlet [bar]	EF014907 Connection standard outlet side ⁿ/ₐ	EF001339 Flange shape ⁿ/ₐ	EF020038 Self-priming ⁿ/ₐ	EF005474 Degree of protection (IP rating) ⁿ/ₐ	EF004265 Recess length [mm]	EF023086 Pump height [mm]	EF000167 Weight [kg]	EF004663 Explosion-proof ⁿ/ₐ	EF014908 Standard motor ⁿ/ₐ	EF014979 Motor efficiency class ⁿ/ₐ	EF016015 With protection against dry running ⁿ/ₐ	EF008837 Approval ⁿ/ₐ	MECHANICAL_SEAL Mechanical seal ⁿ/ₐ	EF023103 With oval counterflanges ⁿ/ₐ	A Angle electrical cabinet [°]	A1 Angle to first bolt hole [°]	A2 Angle to first bolt hole [°]	B1 Thickness flange (incl. sealing edge) [mm]	B2 Thickness flange (incl. sealing edge) [mm]	BO1 Width oval flange [mm]	BO2 Width oval flange [mm]	D1 Outer diameter of flange [mm]	D2 Outer diameter of flange [mm]	DO1 Outer pipe diameter connection [mm]	DO2 Outer pipe diameter connection [mm]	D21 Diameter bolt hole [mm]	D22 Diameter bolt hole [mm]	D41 Diameter sealing edge [mm]	D42 Diameter sealing edge [mm]	DN1 Nominal inner diameter [mm]	DN2 Nominal inner diameter [mm]	F1 Thickness sealing edge [mm]	F2 Thickness sealing edge [mm]	H1 Pump height [mm]	DM Diameter motor [mm]	H2 Height to bottom side electrical cabinet [mm]	H3 Distance to centre connection [mm]	H4 Distance to bottom side motor [mm]	H5 Thickness foot [mm]	H6 Distance to fastening [mm]	K1 Pitch circle [mm]	K2 Pitch circle [mm]	L1 Connection length [mm]	L2 Connection length [mm]	LE4 Width electrical cabinet [mm]	LE5 Length electrical cabinet [mm]	LE7 Centre pump to top side electrical cabinet [mm]	LH1 Centre-to-centre holes [mm]	LH2 Centre-to-centre holes [mm]	LO1 Length oval flange [mm]	LO2 Length oval flange [mm]	N1 Number of bolt holes ⁿ/ₐ	N2 Number of bolt holes ⁿ/ₐ	Z1 Working length [mm]	Z2 Working length [mm]	BF3 Dimensions [mm]	BF4 Dimensions [mm]	BF5 Dimensions [mm]	BF6 Dimensions [mm]	B4 Dimensions [mm]	B5 Dimensions [mm]	B7 Dimensions [mm]	B8 Dimensions [mm]	B9 Dimensions [mm]	B10 Dimensions [mm]	B11 Dimensions [mm]	CF1 Dimensions ⁿ/ₐ	CF2 Dimensions ⁿ/ₐ	DIAMD1 Dimensions [mm]	DIAMD2 Dimensions [mm]	D3 Dimensions [mm]	D4 Dimensions [mm]	DL1 Dimensions [mm]	DL2 Dimensions [mm]	H0 Dimensions [mm]	H7 Dimensions [mm]	H8 Dimensions [mm]	H9 Dimensions [mm]	H10 Dimensions ⁿ/ₐ	H11 Dimensions [mm]	H12 Dimensions [mm]	L4 Dimensions [mm]	L5 Dimensions [mm]	L7 Dimensions [mm]	L8 Dimensions [mm]	L9 Dimensions [mm]	L12 Dimensions [mm]	R1 Dimensions [mm]	B Angle bracket [°]

		4201018	4201018	Helix FIRST V 202-5/25/E/...	WILO SE	Non-self-priming, high-ef...	Highly efficient high-pre...	Helix FIRST V 202-5/25/E/...	EC011334	Vertical	Grey cast iron	EN-GJL-250	Stainless steel	X2CrNi18-9	Grey cast iron	EN-GJL-250	0	0	4.0	14.66	16.0	Terminals	0	400	3	50	0.95	0.37	0.7	F	2900.0	None	Other	no	None	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-20.0	-15.0	Flange	DN 25	25	PN 25	EN 1092-2	Flange;DN25-PN25-EN1092-2	DN 25	25	PN 25	EN 1092-2	Flange	no	IP55	250.0	536.0	24.1	-	Asynchronous	IE2	no	no	BQ1EGG	no	0	45	45	18	18	0	0	115	115	31	31	14	14	65	65	25	25	3.0	3.0	536	138	312	75	312	20	90.5	85	85	125	125	109	104	121	85	85	0	0	4	4	125	125	0.00	0	0.00	0	180	212	0	183	0	0	0	0	0	160	10.8	152	85	13	180	123	0	158.5	12.5	0	0.0	0	100	171	0	183	0	0	181	180
		4201021	4201021	Helix FIRST V 203-5/25/E/...	WILO SE	Non-self-priming, high-ef...	Highly efficient high-pre...	Helix FIRST V 203-5/25/E/...	EC011334	Vertical	Grey cast iron	EN-GJL-250	Stainless steel	X2CrNi18-9	Grey cast iron	EN-GJL-250	0	0	4.0	21.78	16.0	Terminals	0	400	3	50	0.95	0.37	0.7	F	2900.0	None	Other	no	None	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-20.0	-15.0	Flange	DN 25	25	PN 25	EN 1092-2	Flange;DN25-PN25-EN1092-2	DN 25	25	PN 25	EN 1092-2	Flange	no	IP55	250.0	561.0	24.5	-	Asynchronous	IE2	no	no	BQ1EGG	no	0	45	45	18	18	0	0	115	115	31	31	14	14	65	65	25	25	3.0	3.0	561	138	337	75	337	20	115.5	85	85	125	125	109	104	121	85	85	0	0	4	4	125	125	0.00	0	0.00	0	180	212	0	183	0	0	0	0	0	160	10.8	152	85	13	180	123	0	158.5	12.5	0	0.0	0	100	171	0	183	0	0	181	180
		4201024	4201024	Helix FIRST V 204-5/25/E/...	WILO SE	Non-self-priming, high-ef...	Highly efficient high-pre...	Helix FIRST V 204-5/25/E/...	EC011334	Vertical	Grey cast iron	EN-GJL-250	Stainless steel	X2CrNi18-9	Grey cast iron	EN-GJL-250	0	0	4.0	28.78	16.0	Terminals	0	400	3	50	0.95	0.37	0.7	F	2900.0	None	Other	no	None	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-20.0	-15.0	Flange	DN 25	25	PN 25	EN 1092-2	Flange;DN25-PN25-EN1092-2	DN 25	25	PN 25	EN 1092-2	Flange	no	IP55	250.0	586.0	25.0	-	Asynchronous	IE2	no	no	BQ1EGG	no	0	45	45	18	18	0	0	115	115	31	31	14	14	65	65	25	25	3.0	3.0	586	138	362	75	362	20	140.5	85	85	125	125	109	104	121	85	85	0	0	4	4	125	125	0.00	0	0.00	0	180	212	0	183	0	0	0	0	0	160	10.8	152	85	13	180	123	0	158.5	12.5	0	0.0	0	100	171	0	183	0	0	181	180
		4201027	4201027	Helix FIRST V 205-5/25/E/...	WILO SE	Non-self-priming, high-ef...	Highly efficient high-pre...	Helix FIRST V 205-5/25/E/...	EC011334	Vertical	Grey cast iron	EN-GJL-250	Stainless steel	X2CrNi18-9	Grey cast iron	EN-GJL-250	0	0	4.0	36.44	16.0	Terminals	0	400	3	50	1.32	0.55	0.7	F	2900.0	None	Other	no	None	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-20.0	-15.0	Flange	DN 25	25	PN 25	EN 1092-2	Flange;DN25-PN25-EN1092-2	DN 25	25	PN 25	EN 1092-2	Flange	no	IP55	250.0	610.0	26.5	-	Asynchronous	IE2	no	no	BQ1EGG	no	0	45	45	18	18	0	0	115	115	31	31	14	14	65	65	25	25	3.0	3.0	610	130	387	75	387	20	165.5	85	85	125	125	109	104	121	85	85	0	0	4	4	125	125	0.00	0	0.00	0	180	212	0	183	0	0	0	0	0	160	10.8	152	85	13	180	123	0	158.5	12.5	0	0.0	0	100	171	0	183	0	0	181	180
		4201030	4201030	Helix FIRST V 206-5/25/E/...	WILO SE	Non-self-priming, high-ef...	Highly efficient high-pre...	Helix FIRST V 206-5/25/E/...	EC011334	Vertical	Grey cast iron	EN-GJL-250	Stainless steel	X2CrNi18-9	Grey cast iron	EN-GJL-250	0	0	4.0	43.41	16.0	Terminals	0	400	3	50	1.32	0.55	0.7	F	2900.0	None	Other	no	None	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-20.0	-15.0	Flange	DN 25	25	PN 25	EN 1092-2	Flange;DN25-PN25-EN1092-2	DN 25	25	PN 25	EN 1092-2	Flange	no	IP55	250.0	635.0	27.0	-	Asynchronous	IE2	no	no	BQ1EGG	no	0	45	45	18	18	0	0	115	115	31	31	14	14	65	65	25	25	3.0	3.0	635	130	412	75	412	20	190.5	85	85	125	125	109	104	121	85	85	0	0	4	4	125	125	0.00	0	0.00	0	180	212	0	183	0	0	0	0	0	160	10.8	152	85	13	180	123	0	158.5	12.5	0	0.0	0	100	171	0	183	0	0	181	180
		4201033	4201033	Helix FIRST V 207-5/25/E/...	WILO SE	Non-self-priming, high-ef...	Highly efficient high-pre...	Helix FIRST V 207-5/25/E/...	EC011334	Vertical	Grey cast iron	EN-GJL-250	Stainless steel	X2CrNi18-9	Grey cast iron	EN-GJL-250	0	0	4.0	50.30	16.0	Terminals	0	400	3	50	1.32	0.55	0.7	F	2900.0	None	Other	no	None	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-20.0	-15.0	Flange	DN 25	25	PN 25	EN 1092-2	Flange;DN25-PN25-EN1092-2	DN 25	25	PN 25	EN 1092-2	Flange	no	IP55	250.0	660.0	27.5	-	Asynchronous	IE2	no	no	BQ1EGG	no	0	45	45	18	18	0	0	115	115	31	31	14	14	65	65	25	25	3.0	3.0	660	130	437	75	437	20	215.5	85	85	125	125	109	104	121	85	85	0	0	4	4	125	125	0.00	0	0.00	0	180	212	0	183	0	0	0	0	0	160	10.8	152	85	13	180	123	0	158.5	12.5	0	0.0	0	100	171	0	183	0	0	181	180
		4201036	4201036	Helix FIRST V 208-5/25/E/...	WILO SE	Non-self-priming, high-ef...	Highly efficient high-pre...	Helix FIRST V 208-5/25/E/...	EC011334	Vertical	Grey cast iron	EN-GJL-250	Stainless steel	X2CrNi18-9	Grey cast iron	EN-GJL-250	0	0	4.0	58.52	16.0	Terminals	0	400	3	50	1.70	0.75	0.7	F	2900.0	None	Other	no	None	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-20.0	-15.0	Flange	DN 25	25	PN 25	EN 1092-2	Flange;DN25-PN25-EN1092-2	DN 25	25	PN 25	EN 1092-2	Flange	no	IP55	250.0	700.0	33.8	-	Asynchronous	IE3	no	no	BQ1EGG	no	0	45	45	18	18	0	0	115	115	31	31	14	14	65	65	25	25	3.0	3.0	700	170	472	75	472	20	250.5	85	85	125	125	94	94	136	85	85	0	0	4	4	125	125	0.00	0	0.00	0	180	212	0	183	0	0	0	0	0	160	10.8	152	100	13	180	123	0	158.5	12.5	0	0.0	0	100	171	0	183	0	0	181	180
		4201039	4201039	Helix FIRST V 209-5/25/E/...	WILO SE	Non-self-priming, high-ef...	Highly efficient high-pre...	Helix FIRST V 209-5/25/E/...	EC011334	Vertical	Grey cast iron	EN-GJL-250	Stainless steel	X2CrNi18-9	Grey cast iron	EN-GJL-250	0	0	4.0	65.63	16.0	Terminals	0	400	3	50	1.70	0.75	0.7	F	2900.0	None	Other	no	None	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-20.0	-15.0	Flange	DN 25	25	PN 25	EN 1092-2	Flange;DN25-PN25-EN1092-2	DN 25	25	PN 25	EN 1092-2	Flange	no	IP55	250.0	725.0	34.2	-	Asynchronous	IE3	no	no	BQ1EGG	no	0	45	45	18	18	0	0	115	115	31	31	14	14	65	65	25	25	3.0	3.0	725	170	497	75	497	20	275.5	85	85	125	125	94	94	136	85	85	0	0	4	4	125	125	0.00	0	0.00	0	180	212	0	183	0	0	0	0	0	160	10.8	152	100	13	180	123	0	158.5	12.5	0	0.0	0	100	171	0	183	0	0	181	180
		4201042	4201042	Helix FIRST V 210-5/25/E/...	WILO SE	Non-self-priming, high-ef...	Highly efficient high-pre...	Helix FIRST V 210-5/25/E/...	EC011334	Vertical	Grey cast iron	EN-GJL-250	Stainless steel	X2CrNi18-9	Grey cast iron	EN-GJL-250	0	0	4.0	72.68	16.0	Terminals	0	400	3	50	1.70	0.75	0.7	F	2900.0	None	Other	no	None	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-20.0	-15.0	Flange	DN 25	25	PN 25	EN 1092-2	Flange;DN25-PN25-EN1092-2	DN 25	25	PN 25	EN 1092-2	Flange	no	IP55	250.0	750.0	34.7	-	Asynchronous	IE3	no	no	BQ1EGG	no	0	45	45	18	18	0	0	115	115	31	31	14	14	65	65	25	25	3.0	3.0	750	170	522	75	522	20	300.5	85	85	125	125	94	94	136	85	85	0	0	4	4	125	125	0.00	0	0.00	0	180	212	0	183	0	0	0	0	0	160	10.8	152	100	13	180	123	0	158.5	12.5	0	0.0	0	100	171	0	183	0	0	181	180
		4201045	4201045	Helix FIRST V 211-5/25/E/...	WILO SE	Non-self-priming, high-ef...	Highly efficient high-pre...	Helix FIRST V 211-5/25/E/...	EC011334	Vertical	Grey cast iron	EN-GJL-250	Stainless steel	X2CrNi18-9	Grey cast iron	EN-GJL-250	0	0	4.0	80.70	16.0	Terminals	0	400	3	50	2.50	1.10	0.7	F	2900.0	None	Other	no	None	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-20.0	-15.0	Flange	DN 25	25	PN 25	EN 1092-2	Flange;DN25-PN25-EN1092-2	DN 25	25	PN 25	EN 1092-2	Flange	no	IP55	250.0	775.0	36.0	-	Asynchronous	IE3	no	no	BQ1EGG	no	0	45	45	18	18	0	0	115	115	31	31	14	14	65	65	25	25	3.0	3.0	775	170	547	75	547	20	325.5	85	85	125	125	94	94	136	85	85	0	0	4	4	125	125	0.00	0	0.00	0	180	212	0	183	0	0	0	0	0	160	10.8	152	100	13	180	123	0	158.5	12.5	0	0.0	0	100	171	0	183	0	0	181	180
		4201048	4201048	Helix FIRST V 212-5/25/E/...	WILO SE	Non-self-priming, high-ef...	Highly efficient high-pre...	Helix FIRST V 212-5/25/E/...	EC011334	Vertical	Grey cast iron	EN-GJL-250	Stainless steel	X2CrNi18-9	Grey cast iron	EN-GJL-250	0	0	4.0	87.87	16.0	Terminals	0	400	3	50	2.50	1.10	0.7	F	2900.0	None	Other	no	None	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-20.0	-15.0	Flange	DN 25	25	PN 25	EN 1092-2	Flange;DN25-PN25-EN1092-2	DN 25	25	PN 25	EN 1092-2	Flange	no	IP55	250.0	800.0	36.5	-	Asynchronous	IE3	no	no	BQ1EGG	no	0	45	45	18	18	0	0	115	115	31	31	14	14	65	65	25	25	3.0	3.0	800	170	572	75	572	20	350.5	85	85	125	125	94	94	136	85	85	0	0	4	4	125	125	0.00	0	0.00	0	180	212	0	183	0	0	0	0	0	160	10.8	152	100	13	180	123	0	158.5	12.5	0	0.0	0	100	171	0	183	0	0	181	180
		4201051	4201051	Helix FIRST V 213-5/25/E/...	WILO SE	Non-self-priming, high-ef...	Highly efficient high-pre...	Helix FIRST V 213-5/25/E/...	EC011334	Vertical	Grey cast iron	EN-GJL-250	Stainless steel	X2CrNi18-9	Grey cast iron	EN-GJL-250	0	0	4.0	94.99	16.0	Terminals	0	400	3	50	2.50	1.10	0.7	F	2900.0	None	Other	no	None	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-20.0	-15.0	Flange	DN 25	25	PN 25	EN 1092-2	Flange;DN25-PN25-EN1092-2	DN 25	25	PN 25	EN 1092-2	Flange	no	IP55	250.0	850.0	37.4	-	Asynchronous	IE3	no	no	BQ1EGG	no	0	45	45	18	18	0	0	115	115	31	31	14	14	65	65	25	25	3.0	3.0	850	170	622	75	622	20	400.5	85	85	125	125	94	94	136	85	85	0	0	4	4	125	125	0.00	0	0.00	0	180	212	0	183	0	0	0	0	0	160	10.8	152	100	13	180	123	0	158.5	12.5	0	0.0	0	100	171	0	183	0	0	181	180
		4201054	4201054	Helix FIRST V 214-5/25/E/...	WILO SE	Non-self-priming, high-ef...	Highly efficient high-pre...	Helix FIRST V 214-5/25/E/...	EC011334	Vertical	Grey cast iron	EN-GJL-250	Stainless steel	X2CrNi18-9	Grey cast iron	EN-GJL-250	0	0	4.0	102.10	16.0	Terminals	0	400	3	50	2.50	1.10	0.7	F	2900.0	None	Other	no	None	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-20.0	-15.0	Flange	DN 25	25	PN 25	EN 1092-2	Flange;DN25-PN25-EN1092-2	DN 25	25	PN 25	EN 1092-2	Flange	no	IP55	250.0	850.0	37.5	-	Asynchronous	IE3	no	no	BQ1EGG	no	0	45	45	18	18	0	0	115	115	31	31	14	14	65	65	25	25	3.0	3.0	850	170	622	75	622	20	400.5	85	85	125	125	94	94	136	85	85	0	0	4	4	125	125	0.00	0	0.00	0	180	212	0	183	0	0	0	0	0	160	10.8	152	100	13	180	123	0	158.5	12.5	0	0.0	0	100	171	0	183	0	0	181	180
		4201057	4201057	Helix FIRST V 216-5/25/E/...	WILO SE	Non-self-priming, high-ef...	Highly efficient high-pre...	Helix FIRST V 216-5/25/E/...	EC011334	Vertical	Grey cast iron	EN-GJL-250	Stainless steel	X2CrNi18-9	Grey cast iron	EN-GJL-250	0	0	4.0	118.40	16.0	Terminals	0	400	3	50	3.00	1.50	0.7	F	2900.0	None	Other	no	None	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-20.0	-15.0	Flange	DN 25	25	PN 25	EN 1092-2	Flange;DN25-PN25-EN1092-2	DN 25	25	PN 25	EN 1092-2	Flange	no	IP55	250.0	976.0	44.0	0	Asynchronous	IE3	no	no	BQ1EGG	no	0	45	45	18	18	0	0	115	115	31	31	14	14	65	65	25	25	3.0	3.0	976	172	682	75	682	20	450.5	85	85	125	125	110	110	132	85	85	0	0	4	4	125	125	0.00	0	0.00	0	180	212	0	183	0	0	0	0	0	160	10.8	152	115	13	180	123	0	158.5	22.5	0	0.0	0	100	171	0	183	0	0	181	180
		4201058	4201058	Helix FIRST V 218-5/25/E/...	WILO SE	Non-self-priming, high-ef...	Highly efficient high-pre...	Helix FIRST V 218-5/25/E/...	EC011334	Vertical	Grey cast iron	EN-GJL-250	Stainless steel	X2CrNi18-9	Grey cast iron	EN-GJL-250	0	0	4.0	132.90	25.0	Terminals	0	400	3	50	3.00	1.50	0.7	F	2900.0	None	Other	no	None	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-20.0	-15.0	Flange	DN 25	25	PN 25	EN 1092-2	Flange;DN25-PN25-EN1092-2	DN 25	25	PN 25	EN 1092-2	Flange	no	IP55	250.0	1076.0	48.2	0	Asynchronous	IE3	no	no	BQ1EGG	no	0	45	45	18	18	0	0	115	115	31	31	14	14	65	65	25	25	3.0	3.0	1076	172	782	75	782	20	550.5	85	85	125	125	110	110	132	85	85	0	0	4	4	125	125	0.00	0	0.00	0	180	212	0	183	0	0	0	0	0	160	10.8	152	115	13	180	123	0	158.5	22.5	0	0.0	0	100	171	0	183	0	0	181	180
		4201060	4201060	Helix FIRST V 220-5/25/E/...	WILO SE	Non-self-priming, high-ef...	Highly efficient high-pre...	Helix FIRST V 220-5/25/E/...	EC011334	Vertical	Grey cast iron	EN-GJL-250	Stainless steel	X2CrNi18-9	Grey cast iron	EN-GJL-250	0	0	4.0	148.00	25.0	Terminals	0	400	3	50	4.30	2.20	0.7	F	2900.0	None	Other	no	None	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-20.0	-15.0	Flange	DN 25	25	PN 25	EN 1092-2	Flange;DN25-PN25-EN1092-2	DN 25	25	PN 25	EN 1092-2	Flange	no	IP55	250.0	1126.0	50.0	-	Asynchronous	IE3	no	no	BQ1EGG	no	0	45	45	18	18	0	0	115	115	31	31	14	14	65	65	25	25	3.0	3.0	1126	193	832	75	832	20	600.5	85	85	125	125	110	110	132	85	85	0	0	4	4	125	125	0.00	0	0.00	0	180	212	0	183	0	0	0	0	0	160	10.8	152	115	13	180	123	0	158.5	22.5	0	0.0	0	100	171	0	183	0	0	181	180
		4201062	4201062	Helix FIRST V 222-5/25/E/...	WILO SE	Non-self-priming, high-ef...	Highly efficient high-pre...	Helix FIRST V 222-5/25/E/...	EC011334	Vertical	Grey cast iron	EN-GJL-250	Stainless steel	X2CrNi18-9	Grey cast iron	EN-GJL-250	0	0	4.0	162.50	25.0	Terminals	0	400	3	50	4.30	2.20	0.7	F	2900.0	None	Other	no	None	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-20.0	-15.0	Flange	DN 25	25	PN 25	EN 1092-2	Flange;DN25-PN25-EN1092-2	DN 25	25	PN 25	EN 1092-2	Flange	no	IP55	250.0	1226.0	52.0	-	Asynchronous	IE3	no	no	BQ1EGG	no	0	45	45	18	18	0	0	115	115	31	31	14	14	65	65	25	25	3.0	3.0	1226	193	932	75	932	20	700.5	85	85	125	125	110	110	132	85	85	0	0	4	4	125	125	0.00	0	0.00	0	180	212	0	183	0	0	0	0	0	160	10.8	152	115	13	180	123	0	158.5	22.5	0	0.0	0	100	171	0	183	0	0	181	180
		4201064	4201064	Helix FIRST V 224-5/25/E/...	WILO SE	Non-self-priming, high-ef...	Highly efficient high-pre...	Helix FIRST V 224-5/25/E/...	EC011334	Vertical	Grey cast iron	EN-GJL-250	Stainless steel	X2CrNi18-9	Grey cast iron	EN-GJL-250	0	0	4.0	176.90	25.0	Terminals	0	400	3	50	4.30	2.20	0.7	F	2900.0	None	Other	no	None	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-20.0	-15.0	Flange	DN 25	25	PN 25	EN 1092-2	Flange;DN25-PN25-EN1092-2	DN 25	25	PN 25	EN 1092-2	Flange	no	IP55	250.0	1226.0	52.0	-	Asynchronous	IE3	no	no	BQ1EGG	no	0	45	45	18	18	0	0	115	115	31	31	14	14	65	65	25	25	3.0	3.0	1226	193	932	75	932	20	700.5	85	85	125	125	110	110	132	85	85	0	0	4	4	125	125	0.00	0	0.00	0	180	212	0	183	0	0	0	0	0	160	10.8	152	115	13	180	123	0	158.5	22.5	0	0.0	0	100	171	0	183	0	0	181	180
		4201066	4201066	Helix FIRST V 226-5/25/E/...	WILO SE	Non-self-priming, high-ef...	Highly efficient high-pre...	Helix FIRST V 226-5/25/E/...	EC011334	Vertical	Grey cast iron	EN-GJL-250	Stainless steel	X2CrNi18-9	Grey cast iron	EN-GJL-250	0	0	4.0	191.30	25.0	Terminals	0	400	3	50	4.30	2.20	0.7	F	2900.0	None	Other	no	None	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-20.0	-15.0	Flange	DN 25	25	PN 25	EN 1092-2	Flange;DN25-PN25-EN1092-2	DN 25	25	PN 25	EN 1092-2	Flange	no	IP55	250.0	1301.0	53.0	-	Asynchronous	IE3	no	no	BQ1EGG	no	0	45	45	18	18	0	0	115	115	31	31	14	14	65	65	25	25	3.0	3.0	1301	193	1007	75	1007	20	775.5	85	85	125	125	110	110	132	85	85	0	0	4	4	125	125	0.00	0	0.00	0	180	212	0	183	0	0	0	0	0	160	10.8	152	115	13	180	123	0	158.5	22.5	0	0.0	0	100	171	0	183	0	0	181	180

Additional Information

Users who viewed this, were also interested in

2m³/h (nominal flow), PN40

2m³/h (nominal flow), PN40Wilo 15.04.2024

2m³/h (nominal flow), PN16

2m³/h (nominal flow), PN16Wilo 15.04.2024

I.2TS_I - ISO WELDED TEES WITH SLEEVES Stainless steel 304L or 316L

I.2TS_I - ISO WELDED TEES WITH SLEEVES Stainless steel 304L or 316LFG INOX 16.02.2017

22m³/h (nominal flow), PN25

22m³/h (nominal flow), PN25Wilo 15.04.2024

16m³/h (nominal flow), PN25

16m³/h (nominal flow), PN25Wilo 15.04.2024

Parker Hydraulic Pump and Power Systems Division

Gold Cup - Gold Cup

Gold Cup - Gold CupParker Hydraulic Pump and Power Systems Division 22.02.2024

4m³/h (nominal flow), PN25

4m³/h (nominal flow), PN25Wilo 15.04.2024

6m³/h (nominal flow), PN16

6m³/h (nominal flow), PN16Wilo 15.04.2024

6m³/h (nominal flow), PN25

6m³/h (nominal flow), PN25Wilo 15.04.2024

36m³/h (nominal flow), PN25

36m³/h (nominal flow), PN25Wilo 15.04.2024

4m³/h (nominal flow), PN16

4m³/h (nominal flow), PN16Wilo 15.04.2024

22m³/h (nominal flow), PN16

22m³/h (nominal flow), PN16Wilo 15.04.2024

10m³/h (nominal flow), PN16

10m³/h (nominal flow), PN16Wilo 15.04.2024

36m³/h (nominal flow), PN25

36m³/h (nominal flow), PN25Wilo 15.04.2024